Xs T V2.0
size products
This system is used for deep hole drilling when permanent casing installation is required. Reduced sub drilling diameter equivalent to all other systems on the market.
Advantages
- Best crown life on the market
- Easy to lock in the crown even with air on.
Most popular applications
Water well and thermal well
Technical
data
Technical Data
| Casing OD | 30,000" | 762mm |
| Max. Wall | 0,625" | 16mm |
| Crown OD (A) | 32,500" | 825.5mm |
| Crown ID (B) | 26,650" | 676.9mm |
| Driver OD | 28,500" | 723.9mm |
| Hammer Size | 24" | 609.6mm |
Product number
| Standard Crown | XS-T-CR30.00/PLUS |
| SA Crown (severe application) | XS-T-CR30.00/SA |
| Driver Bit (add shank type at the end) | XS-T-DR30.00/*** |
Technical Data
| Casing OD | 32,000" | 812.8mm |
| Max. Wall | 0,625" | 16mm |
| Crown OD (A) | 34,500" | 876.3mm |
| Crown ID (B) | 28,650" | 727.7mm |
| Driver OD | 30,500" | 774.7mm |
| Hammer Size | 24" | 609.6mm |
Product number
| Standard Crown | XS-T-CR32.00/PLUS |
| SA Crown (severe application) | XS-T-CR32.00/SA |
| Driver Bit (add shank type at the end) | XS-T-DR32.00/*** |
Technical Data
| Casing OD | 36,000" | 914.4mm |
| Max. Wall | 0,625" | 16mm |
| Crown OD (A) | 38,500" | 977.9mm |
| Crown ID (B) | 32,650" | 829.3mm |
| Driver OD | 34,500" | 876.3mm |
| Hammer Size | 30" | 762mm |
Product number
| Standard Crown | XS-T-CR36.00/PLUS |
| SA Crown (severe application) | XS-T-CR36.00/SA |
| Driver Bit (add shank type at the end) | XS-T-DR36.00/*** |