Contact us on 819-569-4207 or

Xs GT 12,750″ / 324mm

Xs GT 12,750 system

This system is used for moderate to deep hole drilling when permanent casing installation is required. Casing installation and bedrock drilling is done with the same driver bit.  The diameter of the socket in bedrock is equal to the casing ID. 

Advantages:  – Best pass through system on the market

                        – More convenient

                        – Installation of the casing and rock drilling                              with the same driver bit.

Most popular applications:

Piling, micropiling and site investigation

Xs GT 12,750″ / 324mm

Description:

Xs GT 12,750″ / 324mm System Measurements

Xs_mesure_1

Technical Data:

Casing OD 12,750" 324mm
Max. Wall 0,450" 11.4mm
Crown OD (A) 14,000" 355.6mm
Crown ID (B) 11,850" 301mm
Crown A/F (C) 10,870" 276mm
Driver OD 11,750" 298.5mm
Hammer Size 10" 254mm

Product number:

Standard Crown XS-GT-CR12.75/PLUS
SA Crown (severe application) XS-GT-CR12.75/SA
Driver BIt (add shank type at the end) XS-GT-DR12.75/***
Category: