Xs RU size
products
This system is used when casing needs to be retrieved. Possibility of reutilizing the crown in a Severe Application configuration.
Advantages
- Best crown life on the market
- Drills just slightly bigger than the casing
Most popular applications
Anchoring, geothermal well, horizontal, piling, micropiling and site investigation
Technical
data
Technical Data
| Casing OD | 20,000" | 508mm |
| Max. Wall | 1,000" | 26mm |
| Crown OD (A) | 20,750" | 527mm |
| Crown ID (B) | 15,500" | 393.7mm |
| Driver OD | 16,980" | 431.3mm |
| Hammer Size | 15" | 381mm |
Product number
| Standard Crown | XS-RU-CR20.00/PLUS |
| SA Crown (severe application) | XS-RU-CR20.00/SA |
| Driver BIt (add shank type at the end) | XS-RU-DR20.00/*** |
Technical Data
| Casing OD | 22,000" | 558.8mm |
| Max. Wall | 1,000" | 26mm |
| Crown OD (A) | 22,750" | 578mm |
| Crown ID (B) | 16,950" | 430.5mm |
| Driver OD | 18,550" | 471.2mm |
| Hammer Size | 15" | 381mm |
Product number
| Standard Crown | XS-RU-CR22.00/PLUS |
| SA Crown (severe application) | XS-RU-CR22.00/SA |
| Driver BIt (add shank type at the end) | XS-RU-DR22.00/*** |
Technical Data
| Casing OD | 24,000" | 609.6mm |
| Max. Wall | 1,000" | 26mm |
| Crown OD (A) | 24,750" | 628.7mm |
| Crown ID (B) | 18,950" | 481.3mm |
| Driver OD | 20,550" | 522mm |
| Hammer Size | 18" | 381mm |
Product number
| Standard Crown | XS-RU-CR24.00/PLUS |
| SA Crown (severe application) | XS-RU-CR24.00/SA |
| Driver BIt (add shank type at the end) | XS-RU-DR24.00/*** |
Technical Data
| Casing OD | 26,000" | 660.4mm |
| Max. Wall | 1,000" | 26mm |
| Crown OD (A) | 26,750" | 679.5mm |
| Crown ID (B) | 20,950" | 532mm |
| Driver OD | 22,550" | 572.8mm |
| Hammer Size | 18" | 381mm |
Product number
| Standard Crown | XS-RU-CR26.00/PLUS |
| SA Crown (severe application) | XS-RU-CR26.00/SA |
| Driver BIt (add shank type at the end) | XS-RU-DR26.00/*** |
Technical Data
| Casing OD | 28,000" | 711.2mm |
| Max. Wall | 1,000" | 26mm |
| Crown OD (A) | 28,750" | 730.3mm |
| Crown ID (B) | 22,950" | 583mm |
| Driver OD | 24,550" | 623.6mm |
| Hammer Size | 24" | 609.6mm |
Product number
| Standard Crown | XS-RU-CR28.00/PLUS |
| SA Crown (severe application) | XS-RU-CR28.00/SA |
| Driver BIt (add shank type at the end) | XS-RU-DR28.00/*** |