Xs T size
products
This system is used for deep hole drilling when permanent casing installation and sub drilling are required with thick wall casing.
Advantages
- Best crown life on the market
- Makes a bigger hole in bedrock when
sub drilling.
Most popular applications
Water well and Geothermal well
Technical
data
Technical Data
| Casing OD | 10,750" | 273mm |
| Max. Wall | 0,375" | 9.5mm |
| Crown OD (A) | 12,000" | 304.8mm |
| Crown ID (B) | 10,000" | 254mm |
| Crown A/F (C) | 9,250" | 235mm |
| Driver OD | 9,930" | 252.2mm |
| Sq. Bit OD | 9,938" | 252.4mm |
| Hammer Size | 8" | 203.2mm |
Product number
| Standard Crown | XS-T-CR10.75/PLUS |
| SA Crown (severe application) | XS-T-CR10.75/SA |
| Driver Bit (add shank type at the end) | XS-T-DR10.75/*** |
| Square Bit (add shank type at the end) | XS-T-BI10.75/*** |
Technical Data
| Casing OD | 12,750" | 324mm |
| Max. Wall | 0,450" | 11.5mm |
| Crown OD (A) | 14,000" | 355.6mm |
| Crown ID (B) | 11,850" | 301mm |
| Crown A/F (C) | 10,580" | 268.7mm |
| Driver OD | 11,750" | 298.5mm |
| Sq. Bit OD | 11,813" | 300mm |
| Hammer Size | 10" | 254mm |
Product number
| Standard Crown | XS-T-CR12.75/PLUS |
| SA Crown (severe application) | XS-T-CR12.75/SA |
| Driver Bit (add shank type at the end) | XS-T-DR12.75/*** |
| Square Bit (add shank type at the end) | XS-T-BI12.75/*** |
Technical Data
| Casing OD | 14,000" | 355.6mm |
| Max. Wall | 0,500" | 12.7mm |
| Crown OD (A) | 15,500" | 393.7mm |
| Crown ID (B) | 13,000" | 330.2mm |
| Crown A/F (C) | 11,780" | 299.2mm |
| Driver OD | 12,900" | 327.7mm |
| Sq. Bit OD | 12,938" | 328.6mm |
| Hammer Size | 10" / 12" | 254mm / 304.8mm |
Product number
| Standard Crown | XS-T-CR14.00/PLUS |
| SA Crown (severe application) | XS-T-CR14.00/SA |
| Driver Bit (add shank type at the end) | XS-T-DR14.00/*** |
| Square Bit (add shank type at the end) | XS-T-BI14.00/*** |
Technical Data
| Casing OD | 16,000" | 406.4mm |
| Max. Wall | 0,270" | 6.9mm |
| Crown OD (A) | 18,500" | 470mm |
| Crown ID (B) | 15,450" | 392.4mm |
| Crown A/F (C) | 13,580" | 345mm |
| Driver OD | 15,375" | 390.5mm |
| Sq. Bit OD | 15,375" | 390.5mm |
| Hammer Size | 12" | 304.8mm |
Product number
| Standard Crown | XS-T-CR16.00/PLUS |
| SA Crown (severe application) | XS-T-CR16.00/SA |
| Driver Bit (add shank type at the end) | XS-T-DR16.00/*** |
| Square Bit (add shank type at the end) | XS-T-BI16.00/*** |
Technical Data
| Casing OD | 18,000" | 457.2mm |
| Max. Wall | 0,500" | 12.7mm |
| Crown OD (A) | 20,000" | 508mm |
| Crown ID (B) | 17,070" | 433.6mm |
| Crown A/F (C) | 15,375" | 390.5mm |
| Driver OD | 16,950" | 430.5mm |
| Sq. Bit OD | 16,938" | 430.2mm |
| Hammer Size | 12" / 15" | 304.8mm / 381mm |
Product number
| Standard Crown | XS-T-CR18.00/PLUS |
| SA Crown (severe application) | XS-T-CR18.00/SA |
| Driver Bit (add shank type at the end) | XS-T-DR18.00/*** |
| Square Bit (add shank type at the end) | XS-T-BI18.00/*** |