Contact us on 819-569-4207 or

Xs GT 7,000″ / 177.8mm

Xs GT 7,000 system

This system is used for moderate to deep hole drilling when permanent casing installation is required. Casing installation and bedrock drilling is done with the same driver bit.  The diameter of the socket in bedrock is equal to the casing ID. 

Advantages:  – Best pass through system on the market

                        – More convenient

                        – Installation of the casing and rock drilling                              with the same driver bit.

Most popular applications:

Piling, micropiling and site investigation

Xs GT 7,000″ / 177.8mm

Description:

Xs GT 7,000″ / 177.8mm System Measurements

Xs_mesure_1

Technical Data:

Casing OD 7,000" 177.8mm
Max. Wall 0,465" 11.8mm
Crown OD (A) 7,750" 196.9mm
Crown ID (B) 6,070" 154.2mm
Crown A/F (C) 5,340" 135.6mm
Driver OD 6,000" 152.4mm
Hammer Size 5" 127mm

Product number:

Standard Crown XS-GT-CR7.00/PLUS
SA Crown (severe application) XS-GT-CR7.00/SA
Driver BIt (add shank type at the end) XS-GT-DR7.00/***
Category: