Contact us on 819-569-4207 or

Xs GTE 6,000″ / 152.4mm

Xs GTE 6,000 system

This economical system is used for shallow to moderate hole drilling when permanent or temporary casing installation is required. Casing installation and bedrock drilling is done with the same driver bit.  

Advantages:   – Best pass through system on the market

                         – More convenient

                         – Installation of the casing and rock                                           drilling with same driver bit.

Most popular applications:

Piling, micropiling and site investigation

Xs GTE 6,000″ / 152.4mm

Description:

Xs GTE 6,000″ / 152.4mm System Measurements

Xs_mesure_1

Technical Data:

Casing OD 6,000" 152.4mm
Max. Wall 0,530" 13.4mm
Crown OD (A) 6,325" 160.6mm
Crown ID (B) 4,900" 124.4mm
Crown A/F (C) 4,260" 108.2mm
Driver OD 4,850" 123.1mm
Hammer Size 4" 127mm

Product number:

Standard Crown XS-GTE-CR6.00/PLUS
Driver BIt (add shank type at the end) XS-GTE-DR6.00/***
Category: