Contact us on 819-569-4207 or

Xs GTE 4,500″ / 114.3mm

Xs GTE 4,500 system

This economical system is used for shallow to moderate hole drilling when permanent or temporary casing installation is required. Casing installation and bedrock drilling is done with the same driver bit.  

Advantages:   – Best pass through system on the market

                         – More convenient

                         – Installation of the casing and rock                                           drilling with same driver bit.

Most popular applications:

Piling, micropiling and site investigation

Xs GTE 4,500″ / 114.3mm

Description:

Xs GTE 4,500″ / 114.3mm System Measurements

Xs_mesure_1

Technical Data:

Casing OD 4,500" 114.3mm
Max. Wall 0,500" 12.7mm
Crown OD (A) 4,750" 120.7mm
Crown ID (B) 3,480" 88.4mm
Crown A/F (C) 2,950" 75mm
Driver OD 3,438" 87.3mm
Hammer Size 2" 50.8mm

Product number:

Standard Crown XS-GTE-CR4.50/PLUS
Driver BIt (add shank type at the end) XS-GTE-DR4.50/***
Category: