Contact us on 819-569-4207 or

Xs GT 5,500″ / 139.7mm

Xs GT 5,500 system

This system is used for moderate to deep hole drilling when permanent casing installation is required. Casing installation and bedrock drilling is done with the same driver bit.  The diameter of the socket in bedrock is equal to the casing ID. 

Advantages:  – Best pass through system on the market

                        – More convenient

                        – Installation of the casing and rock drilling                              with the same driver bit.

Most popular applications:

Piling, micropiling and site investigation

Xs GT 5,500″ / 139.7mm

Description:

Xs GT 5,500″ / 139.7mm System Measurements

Xs_mesure_1

Technical Data:

Casing OD 5,500" 139.7mm
Max. Wall 0,313" 8mm
Crown OD (A) 6,250" 158.8mm
Crown ID (B) 4,870" 123.7mm
Crown A/F (C) 4,300" 109.2mm
Driver OD 4,813" 122.2mm
Hammer Size 4" 101.6mm

Product number:

Standard Crown XS-GT-CR5.50/PLUS
SA Crown (severe application) XS-GT-CR5.50/SA
Driver BIt (add shank type at the end) XS-GT-DR5.50/***
Category: